Install the arduino-cli tool if you don't have it already: Use a bash shell to execute the following command: four 10 kOhm resistors called R.1 - R.4 connected to the supply voltage. The following ...

The two SCD41 sensors we want to connect have an I2C address of 0x62, which cannot be changed. Therefore, to communicate with both sensors from the micro controller, we will use a separate I2C bus for ...

The I2C (Inter-Integrated Circuit) bus is a synchronous serial communication protocol that allows multiple electronic components (sensors, displays, memories, etc.) to be connected within the same ...

This articles describes how you can use I2C (TWI) communication, Arduino and temperature sensors to measure 3 different temperatures. It can be very helpful when you want to measure the outside, ...

Assume that you are moving towards a complex microcontroller project bundled with blinkers, beepers, and a display panel. To link a standard 16×2 LCD directly with the microcontroller, for instance ...

A lot of great ICs use I2C to communicate, but debugging a non-working I2C setup can be opaque, especially if you’re just getting started with the protocol/bus. An I2C bus scanner can be a helpful ...