Perhaps one of the most common modules in an Arduino starter kit, the RGB LED lets you create all sorts of colors with just four pins from the Arduino. This tutorial demonstrates two ways to use this ...

What if we can generate different colors using a single RGB led and make our room’s corner more attractive? So, here is a simple Arduino based color mixing lamp which can change color when there is ...

In this project we are going to interface RGB (Red Green Blue) LED with Arduino Uno. A typical RGB LED is shown in below figure: The RGB LED will have four pins as shown in figure. So there are two ...

C# Application to control RGB Leds, or LED Strips with arduino. READ the wiki! Hello world! Today i made a c# Application with visual studio to control RGB Leds/Led strips. The Arduino code is very ...

This system uses a colour-changing LED (RGB LED/tri-colour LED) that switches to a new colour every 5 seconds. Simultaneously, the colour name is displayed on an OLED mini screen (SSD1306). This ...

the RGB LED color mixer is a project that is suitable for the beginner Arduino users who is interested in building an interactive gadget to mix colors. The simple circuit combines three potentiometers ...

Here is a 3D light show that will astound you with its combinations. Inexpensive and easy to make thanks to an Arduino controller, the design enables you to play with the existing effects and, most ...

This library currently supports any board based on the ATmega168, ATmega328P, ATmega32U4, or ATmega2560 which runs at 8 MHz, 16 MHz, or 20 MHz. The LED strip's input connector has two pins that should ...

Presented here is a simple 7×5 LED matrix circuit vriven by Arduino Uno (Arduino LED). It can be used to display your name or create any number of patterns. If the logic of this LED matrix is ...

Today, we’re going to explore the uses of addressable LEDs. Addressable LED is an easy way to add complex lighting effects to any project. Each addressable LED has an integrated driver that allows you ...